Before buying a home or villa, you need to look beyond the photos. We have gathered the points an architect checks at a viewing, from structure and damp to roof, services and permits, into one checklist.
When buying a home, most of us look at the view, the light and the size of the rooms. These matter, of course; but for a home you will live in happily for years, the hidden side of the building is just as decisive as the visible one. The list below summarises the points an architect never overlooks at a viewing. It is meant as a first check; if there is a serious doubt, an on-site expert inspection is always the right path.
1. Structure and cracks
- Are there diagonal or wide cracks in columns, beams or shear walls?
- Is there spalling, rust staining from reinforcement or blistering on concrete surfaces?
- Do doors and windows stick, or does the floor feel noticeably uneven?
- Has an alteration left the ground floor fully open or removed load-bearing elements?
Fine shrinkage cracks in plaster are usually cosmetic; but diagonal, wide or column-beam junction cracks should be examined by an expert.
2. Damp, mould and waterproofing
- Are there stains, mould or blistering paint at the base of walls, in corners and behind cupboards?
- Is there a damp smell in the basement or on the ground floor?
- Are there water marks on ceilings below the bathroom and kitchen?
- Does a single freshly painted wall stand out? Sometimes this hides a stain.
Along the Muğla coast, damp is the problem we meet most often, especially in holiday homes that stay closed for long periods.
3. Roof, terraces and facade
Broken or slipped tiles, blocked gutters, cracks in terrace floors and signs of standing water can mean expensive repairs later. If possible, always look into the roof space and at ceilings below terraces. Blistering render and peeling paint on the facade can signal insulation and water management problems.
4. Services and energy
- Is the electrical panel up to date, with a residual current device?
- Are the water pipes galvanised or have they been renewed? How are the colour and pressure of the tap water?
- Are the windows double-glazed and insulated? How is heating and cooling provided?
- Is drainage connected to the mains sewer or to a septic tank?
5. Permits, occupancy and match with drawings
Check whether there is a building permit and occupancy certificate, what the title status is (land, construction servitude or condominium ownership) and whether the building matches its approved drawings. Enclosed balconies, added floors or loft rooms not shown on the drawings can cause problems later. In protected areas, the changes that can be made are more limited. For title records and annotations, official sources are the soundest route.
6. Surroundings and the future
Could building on neighbouring plots block the view? Is a new zoning plan being prepared for the area? How do the surroundings change between summer and winter? The answers directly affect the home’s value in the long term.
Conclusion
A good purchase starts with emotion and is completed with information. You can take this list with you to viewings; and if anything worries you, Nest Yapı Mimarlık can inspect the home on site with a pre-purchase building condition report and share the likely renovation cost in writing.